- GASTEC手動氣體采樣...
- GASTEC氣體檢測管
- GASTEC長時間（時量...
- GASTEC電泵用氣體檢...
- 日本光明（北川式）氣體檢...
- 日本KOMYOKK手動氣...
- 自動氣體采樣器
- 突發性有毒有害氣體檢測箱
- 惡臭氣體快速檢測箱
- 煙道氣體快速檢測箱
- 快速水質檢測管
- 快速水質、地質污染**檢...
- 便攜式氣體報警器
- 恩尼克思?xì)怏w檢測報警器
- 壓縮空氣有害不純物檢測套...
- 標準氣體發生裝置
- 室內空氣質量檢測儀
- 特殊用檢測管
- 國產氣體檢測管及采樣器
- 便攜式氣味傳感器
- 氣體采樣袋
- 配件及耗材
- 氣體傳感器
產品詳情
簡單介紹：
苯乙烯C6H5CH=CH2氣體檢測管158S
苯乙烯C6H5CH=CH2氣體檢測管158S ，苯乙烯C6H5CH=CH2氣體檢測管158S STYRENE 2.5-300ppm，日本光明理化工業株式會社從1947年開始，在氣體分析領域開拓了六十余年 , 形成了馳名于世的 ” 北川 ” 式氣體檢測管
詳情介紹：
苯乙烯C6H5CH=CH2氣體檢測管158S
苯乙烯C6H5CH=CH2氣體檢測管158S ，苯乙烯C6H5CH=CH2氣體檢測管158S STYRENE 2.5-300ppm，日本光明理化工業株式會社從1947年開始，在氣體分析領域開拓了六十余年 , 形成了馳名于世的 ” 北川 ” 式氣體檢測管。氣體快速分析法 ” 北川 ” 的歷史就是日本檢測管的歷史 。目前是世界上*大的檢測管生產廠家，也是日本**家通過美國SEI的認證，歐盟的認證的檢測管廠家。公司不僅有ISO9001:2000的認證，還獲得了環境管理的ISO14001的認證。北川式手動氣體采集器AP-20 備有采氣完成指示計 , 可以清楚的判明采氣是否完成 . • 有專門截留玻璃的截留槽 , 以防止檢測管割尖時玻璃片飛濺 . • 有采氣容積為 50 毫升和 100 毫升的兩段式制動卡 . • 采氣器極為小巧 , 并有便于攜帶的皮具包 。
Tube No.158S
1. PERFORMANCE
1) Measuring range ：5-300 ppm 2.5-150 ppm
Number of pump strokes 1(100ml) 2(200ml)
2) Sampling time ：1 minute/1 pump stroke
3) Detectable limit ：0.5 ppm(200ml)
4) Shelf life ：3 years
5) Operating temperature ：0～40℃
6) Reading ：Direct reading from the scale calibrated by 1 pump stroke
7) Colour change ：White→Yellow
2. RELATIVE STANDARD DEVIATION
RSD-low：15％ RSD-mid.：15％ RSD-high : 10％
3. CHEMICAL REACTION
A polymer of Styrene is produced by sulphuric acid.
4. CALIBRATION OF THE TUBE
GAS CHROMATOGRAPHY
5. INTERFERENCE AND CROSS SENSITIVITY
300
250
200
150
100
50
20
5
ppm
GAS To pump
158S STYRENE
Substance ppm Interference ppm Coexistence
Acrylonitrile FIG.1 Tafhfeec atecdc.uracy of readings is not 400 Lower readings are given.
Butadiene 3 Similar stain is produced. 5 Uneven discolouration is produced
FIG.2 and higher readings are given.
Formaldehyde 〃15 Yellowish orange stain is produced
FIG.3 and higher readings are given.
Acetaldehyde 〃350 Similar stain is produced and
higher readings are given.
Methyl alcohol The accuracy of readings is not 0.35％ Pale discolouration is produced
affected. and higher readings are given.
Ethyl alcohol 〃0.18％ 〃
Ethyl acetate 〃700 〃
Butyl acetate 〃700 〃
(NOTE)
In case of 2 pump strokes, following formula is available for actual concentration.
Actual concentration＝1/2×Reading value.
0
200
100
Acrylonitrile Butadiene
FIG.1 Influence of Acrylonitrile Styrene indicating value 〔
ppm〕
500 1000 0
200
100
FIG.2 Influence of Butadiene
Styrene indicating value 〔ppm〕
〔ppm〕? 50 100 0
200
100
Formaldehyde
FIG.3 Influence of Formaldehyde
1. PERFORMANCE
1) Measuring range ：5-300 ppm 2.5-150 ppm
Number of pump strokes 1(100ml) 2(200ml)
2) Sampling time ：1 minute/1 pump stroke
3) Detectable limit ：0.5 ppm(200ml)
4) Shelf life ：3 years
5) Operating temperature ：0～40℃
6) Reading ：Direct reading from the scale calibrated by 1 pump stroke
7) Colour change ：White→Yellow
2. RELATIVE STANDARD DEVIATION
RSD-low：15％ RSD-mid.：15％ RSD-high : 10％
3. CHEMICAL REACTION
A polymer of Styrene is produced by sulphuric acid.
4. CALIBRATION OF THE TUBE
GAS CHROMATOGRAPHY
5. INTERFERENCE AND CROSS SENSITIVITY
300
250
200
150
100
50
20
5
ppm
GAS To pump
158S STYRENE
Substance ppm Interference ppm Coexistence
Acrylonitrile FIG.1 Tafhfeec atecdc.uracy of readings is not 400 Lower readings are given.
Butadiene 3 Similar stain is produced. 5 Uneven discolouration is produced
FIG.2 and higher readings are given.
Formaldehyde 〃15 Yellowish orange stain is produced
FIG.3 and higher readings are given.
Acetaldehyde 〃350 Similar stain is produced and
higher readings are given.
Methyl alcohol The accuracy of readings is not 0.35％ Pale discolouration is produced
affected. and higher readings are given.
Ethyl alcohol 〃0.18％ 〃
Ethyl acetate 〃700 〃
Butyl acetate 〃700 〃
(NOTE)
In case of 2 pump strokes, following formula is available for actual concentration.
Actual concentration＝1/2×Reading value.
0
200
100
Acrylonitrile Butadiene
FIG.1 Influence of Acrylonitrile Styrene indicating value 〔
ppm〕
500 1000 0
200
100
FIG.2 Influence of Butadiene
Styrene indicating value 〔ppm〕
〔ppm〕? 50 100 0
200
100
Formaldehyde
FIG.3 Influence of Formaldehyde