產品詳情
簡單介紹：
北川式氯化氫HCl氣體檢測管173SA
北川式氯化氫HCl氣體檢測管173SA，氯化氫HCl氣體檢測管173SA HYDROGEN CHLORIDE 20-1200ppm，日本光明理化工業株式會社從1947年開始，在氣體分析領域開拓了六十余年 , 形成了馳名于世的 ” 北川 ” 式氣體檢測管
詳情介紹：
北川式氯化氫HCl氣體檢測管173SA
北川式氯化氫HCl氣體檢測管173SA，氯化氫HCl氣體檢測管173SA HYDROGEN CHLORIDE 20-1200ppm，日本光明理化工業株式會社從1947年開始，在氣體分析領域開拓了六十余年 , 形成了馳名于世的 ” 北川 ” 式氣體檢測管。氣體快速分析法 ” 北川 ” 的歷史就是日本檢測管的歷史 。目前是世界上*大的檢測管生產廠家，也是日本**家通過美國SEI的認證，歐盟的認證的檢測管廠家。公司不僅有ISO9001:2000的認證，還獲得了環境管理的ISO14001的認證。北川式手動氣體采集器AP-20 備有采氣完成指示計 , 可以清楚的判明采氣是否完成 . • 有專門截留玻璃的截留槽 , 以防止檢測管割尖時玻璃片飛濺 . • 有采氣容積為 50 毫升和 100 毫升的兩段式制動卡 . • 采氣器極為小巧 , 并有便于攜帶的皮具包 。
Tube No.173SA
1. PERFORMANCE
1) Measuring range ：40-1,200 ppm 20-600 ppm
Number of pump strokes 1/2(50ml) 1(100ml)
2) Sampling time ：1.5 minutes/1 pump stroke
3) Detectable limit ：5 ppm
4) Shelf life ：2 years
5) Operating temperature ：0～40℃
6) Reading ：Direct reading from the scale calibrated by 1 pump stroke
7) Colour change ：Purple→Pink
2. RELATIVE STANDARD DEVIATION
RSD-low：5％ RSD-mid.：5％ RSD-high：5％
3. CHEMICAL REACTION
By reacting witl alkali, PH indicator is discoloured.
HCI＋NaOH→NaCI＋H2O
4. CALIBRATION OF THE TUBE
COLOURIMETRY METHOD
5. INTERFERENCE AND CROSS SENSITIVITY
??????
GAS To pump
DETECTOR TUBE
(white)
DEHUMIDIFIER TUBE
600
500
400
300
200
100
100
20
100ml
ppm
173SA HYDROGEN CHLORIDE
Substance Interference ppm Coexistence
Sulphur dioxide Yellow - Pink double - layer stains are
FIG.1 Yellow stain is produced. pHroyddruocgeedn a cnhdlo trhidise p cinokn csetanitnra intiodnic.ates
Chlorine 〃
Hydrogen sulphide 500 The accuracy of readings is not affected.
(NOTE)
In case of 1 / 2 pump strokes, following formula is available for the actual concentration.
Actual concentration＝2×Reading value
0
600
400
200
Sulphur dioxide〔ppm〕?
FIG.1 Influence of Sulphur dioxide
1. PERFORMANCE
1) Measuring range ：40-1,200 ppm 20-600 ppm
Number of pump strokes 1/2(50ml) 1(100ml)
2) Sampling time ：1.5 minutes/1 pump stroke
3) Detectable limit ：5 ppm
4) Shelf life ：2 years
5) Operating temperature ：0～40℃
6) Reading ：Direct reading from the scale calibrated by 1 pump stroke
7) Colour change ：Purple→Pink
2. RELATIVE STANDARD DEVIATION
RSD-low：5％ RSD-mid.：5％ RSD-high：5％
3. CHEMICAL REACTION
By reacting witl alkali, PH indicator is discoloured.
HCI＋NaOH→NaCI＋H2O
4. CALIBRATION OF THE TUBE
COLOURIMETRY METHOD
5. INTERFERENCE AND CROSS SENSITIVITY
??????
GAS To pump
DETECTOR TUBE
(white)
DEHUMIDIFIER TUBE
600
500
400
300
200
100
100
20
100ml
ppm
173SA HYDROGEN CHLORIDE
Substance Interference ppm Coexistence
Sulphur dioxide Yellow - Pink double - layer stains are
FIG.1 Yellow stain is produced. pHroyddruocgeedn a cnhdlo trhidise p cinokn csetanitnra intiodnic.ates
Chlorine 〃
Hydrogen sulphide 500 The accuracy of readings is not affected.
(NOTE)
In case of 1 / 2 pump strokes, following formula is available for the actual concentration.
Actual concentration＝2×Reading value
0
600
400
200
Sulphur dioxide〔ppm〕?
FIG.1 Influence of Sulphur dioxide